Display Map

NOTE

See Figure 1. When the Heading Indicator/Current Position Icon (10) is fading or flashing, it represents that there is a very low GPS signal. See GPS Information in this section.

1.	Home Screen: a. Navigate: Home > Navigation.
2.	Left Hand Control: a. Short Press on Home: Toggles between current screen and Home screen. b. Long Press on Home: Toggles to Quick Jump screen.
3.	Voice Recognition: a. Press Voice Recognition on left hand control. b. Speak Show Map into microphone.
4.	Quick Jump: a. Long Press on Home: Toggles to Quick Jump screen.

Some of the highlights for the map screen are:

Search: Used to search, find and select a destination, route, ride or other location that can be used in navigation.
Menu: Select menu to show map and navigation options and their settings.
Data Fields: Select left or right data fields to change information shown in these fields.
Next Turn Guidance: Displays distance, turn information and a repeat icon which will repeat the last navigation voice prompt.

1	Search
2	Current street
3	Menu
4	Map compass setting
5	Highway services
6	Stop or pause route, skip waypoint
7	Right data field
8	Next maneuver turn
9	Distance to next maneuver
10	Heading indicator/current position icon
11	Next maneuver street
12	Repeat voice instruction
13	Left data field (or current audio source)
14	Zoom out
15	Map scale
16	Zoom in

Figure 1. Navigation Map

Change Map Settings

Map settings will allow the user to select from a list to set the appearance of the screen. Features can be turned on, off or adjusted.

NOTE

* The asterisk denotes system default.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: Settings.
4.	POI Icons: Check the POI items to be displayed on the map.
5.	Map View: 2D North*, 2D heading, 3D.
6.	Auto Zoom: Off*, Near, Normal, Far. a. When auto zoom is enabled, the navigation system will automatically zoom the map view as the vehicle is approaching predetermined locations. Upon passing the location, the navigation system will automatically zoom out to the rider's selected Near/Normal/Far zoom level. When disabled the map zoom level remains fixed at the rider's last setting regardless of the current or approaching locations alone the route.
7.	Nav Prompts: ON/OFF. a. Audio guidance prompts.
8.	Current Street: ON*/OFF. a. Displays the current street along the top of the map.
9.	Next Street Bar: ON*/OFF. a. Displays the next turn at the bottom of the map.
10.	Lane Guidance: ON*/OFF. a. Displays lane guidance arrows along the highlighted route. When a turn is required on a multi-lane highway, the map displays bright orange arrows to suggest the proper lanes. Graphical representations of signposts and junctions are displayed.
11.	Audio Information Bar: ON/OFF*. a. Displays the current audio source along the bottom of the map.
12.	Left and Right Data Fields: ON*/OFF. Displays the left and right wing data fields.
13.	Speed and Flow: ON*/OFF. Displays traffic overlay colors on the map.
14.	Signposts: ON*/OFF.
15.	Junction View: ON*/OFF.
16.	3D Terrain: ON*/OFF.
17.	3D Buildings: ON*/OFF.
18.	Highway Services: Enabled/Disabled. a. This helps the rider identify what services are available at the next few highway exits along their route. This also identifies which exit to use.
19.	Motorcycle Icon: Blue Arrow, Electra Glide, Road Glide or Street Glide. a. Shows position of motorcycle on map.
20.	Restore Defaults: Selecting Yes resets the menu to factory default and goes back to the top of menu.

Change Nav Settings

Map settings allow the user to select from a list to set the appearance of the screen.

Nav settings allow the user to select from a list to set how the NAV engine performs searches, route calculations and displays results.

NOTE

* The asterisk denotes system default.

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Settings.
4.	Search Area: a. Near Me* b. Around Location c. Near Destination d. Along Route
5.	Route Preferences: a. Fastest* b. Shortest c. Twisty d. Scenic
6.	Sort Preferences: a. Relevance* b. Distance c. Alphabetical
7.	Round Trip: NOTE Only a single destination is supported by the Round Trip option. The icon is disabled when routing is active. If Round Trip is checked, the Location is saved as the return point when Go is pressed. a. ON/OFF
8.	Alternate Routes: a. Different Types* b. Same Type c. OFF
9.	Avoidance: a. Highways b. Toll Roads c. Ferries d. Tunnels e. In-Process Data (IPD) f. Car/Train g. Unpaved Roads h. Seasonal Restrictions i. Borders
10.	Restore Defaults: a. Yes or No

Change Data Field

Navigate: Home > Navigation.

Select: Left or right data wing field.

See Navigation → Map → Data Field Options. Choose an option from the list to display in the field. Many of the data field settings (such as Time to Via or Arrival Distance) are only relevant during an active route.

Table 1. Data Field Options

DATA FIELD OPTIONS
Arrival Distance	Arrival Time	Clock
Current Speed	Elevation	GPS Accuracy
Heading	Moving Time	Overall Average Speed
Speed Limit	Stopped Time	Temperature
Time Remaining	Time To Turn	Time To Via
Total Time	Via Distance

Map Navigation Option Menu

1.	Navigate: Home > Navigation.
2.	Select: Menu.

NOTE

* The asterisk denotes if the route is active, the option is displayed.

The following options are available:

Stop*
Pause*
Skip Waypoint*
Location
Maneuvers
Destination*
Weather
Traffic
Fuel Prices

Route Preferences and Avoidances

Route Preferences is selected if the rider is looking for a specific type of road or path for their route calculation: Scenic, Fastest, Shortest, Twisty.

Selections can also be made to avoid specific types of roads or routes during a calculation such as: Highways, Toll Roads, Ferries, Tunnels, In-Process Data (IPD), Car/Train, Unpaved Roads, Seasonal Restrictions, Borders.

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Settings.

Auto zoom

Auto zoom can be set up one of four ways when the rider's touchscreen map approaches it predetermined location.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: Settings.
4.	Select Auto Zoom to the desired option: a. OFF: Auto zoom is disabled. b. Near: Will return to narrow scale. c. Normal: Will return to middle scale. d. Far: Will return to wide scale.

Map Scrolling: Touchscreen

1.	With the map displayed, press on the touchscreen. The scrolling tool (circle with arrows) is shown on the map. The title bar displays the name of the street that is being viewed.
2.	Scroll: Press and hold the screen to scroll.
3.	Jump: Press another location on the map to jump.
4.	Route to Location: Select icon in upper right corner of map to route to location.
5.	End Scrolling: Select back to end scrolling and return to current position on map.

Map Scrolling: Hand Controls

1.	Select: Top title bar.
2.	Press and Release: Cursor/Select on right hand control.
3.	Select: Arrow down to engage scrolling.
4.	Select: Directional arrow with Cursor/Select. Press and hold to scroll to destination.
5.	Route to Location: Select the center circle to route to the location on the map.

Selecting POI on Map

NOTE

Use Map Scrolling Hand Controls.

POI icons are only visible on the map at closer zoom levels. See Change Map Settings to change the types of POI icons that are displayed on the map.

1.	See Figure 2. Scroll: POI icon on map. Zoom-in close to the icon.
2.	Refer to Table 2. Select: POI location in the circle. The radio calculates a route to the selected POI. If multiple POIs are in the same location, the system prompts with a list of POIs.
3.	Select: Option icon to show more POI options. Otherwise, select Go to begin route.

Figure 2. POI on Map

Table 2. POI Icons

ICON	DESCRIPTION
	ATM/Banking
	Automotive
	Airport
	Coffee shop
	Community
	Entertainment
	Gas stations
	Harley-Davidson
	Health and beauty
	Highway exit
	Hospital
	Hotel/Motels
	Other
	Parking
	Recreation
	Rest Areas
	Restaurant
	Shopping
	Travel