Route To Destination: Address

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Search.
4.	Enter address.

NOTE

The system uses the smart speller to narrow entries according to the contents of the navigation database.
The system provides lists of possible destinations based on the input. For example, entering "Birch Street" generates a list of all cities with a "Birch Street" in the database.
As a minimum, the system requires either a postal code or a city and state. If a street address is not entered, the system navigates to the city center. Requirements may vary slightly according to region.

Route To Destination: Home

NOTE

If home is not programmed, see Saving A Destination: Home

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Go Home.

NOTE

To delete or change the home destination, activate a route to home and select Options on the Go Home screen.
Once a home address has been saved, a voice command can also be used to navigate home. Press the Voice Recognition switch and say Home.

Route To Destination: Recent

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: Recent.
4.	Select a recent route from list. Select Go.

Route To Destination: Contacts

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: Contacts.
4.	Select: Phone or Radio.
5.	Select: Address and route to destination.

Route To Destination: Saved

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: Saved.
4.	Select: Saved item from list.
5.	Select: Route/View.
6.	Select: Go from Destination screen.

Route To Destination: Map Scroll Tool

NOTE

Use Map Scrolling Hand Controls.

1.	With the map displayed, press on the touchscreen to activate the scrolling tool.
2.	Scroll to a location or POI.
3.	Select the center circle to route to the location or POI on the map.
4.	Select: Go.

NOTE

See Navigation → Map for scrolling operation.

Route To Destination: POI

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: POI's.
4.	Select: Item from Category list.
5.	Select: Item from subcategory list.
6.	Select a location from list. Select Go.

Route To Destination: Dealership

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: H-D Bar and Shield.
4.	Select a location from list. Select Go.

Route To Destination: Emergency

1.	Navigate: Home > Navigation
2.	Select: Search.
3.	Select: Emergency.
4.	Select: Hospital, Police or Fire Dept.
5.	Select a location from the list. Select Go.

Figure 1. Route To Destination: Emergency

Route To Destination: Coordinates

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Search.
4.	Input: Latitude and longitude coordinates. The formats can include heading (h) such as North, degrees (d), minutes (m), and seconds (s). a. h ddd.ddddd° b. h ddd° mm" ss.s' c. h ddd° mm.mmm'

Table 1. Destination Coordinates

Format Examples
Latitude, Longitude	40.44611, -79.98222
Degrees,Minutes,Seconds	40° 26' 46" N 79° 58' 56" W
Degrees,Decimal,Minutes	40° 26.767' N 79° 58.933' W
Decimal Degrees	40.446° N 79.982° W

Route to Destination: Fuel

NOTE

The radio must have a SiriusXM subscription for this feature to work.

Navigate: Home > Navigation.

Select: Menu.

Select: Fuel Prices.

Select: Fuel type. Back out of screen when selection is made.

Select: View Prices.

See Figure 2. Select a fuel station from list.

1	Fuel grade/type
2	Sort by distance/brand name/price
3	Fuel price with station name and address
4	Direction of station with distance

Figure 2. Station Selection

See Figure 3. Select: Route/View.

1	Fuel station selected
2	Engage route
3	Dial gas station
4	Display prices for all fuel types at station

Figure 3. Route/View

Select: Go.

Route To Destination: Voice Command

1.	With route active, press the Voice Recognition button on left hand control.
2.	Select one of the following: a. Route to Destination: Address Speak Destination followed by the address. b. Route to Destination: Saved Speak Favorite followed by the saved destination name. c. Route to Destination: POI Speak Find Next followed by the type of destination or brand name (such as Bank or Gas Station).

Route to Destination: Repeat Navigation Instruction

See Figure 4. Select: Repeat icon (1). This will repeat the last command given by navigation.

Canceling or Pausing a Route: Using Menu

1.	See Figure 4. Select: Stop icon (2) on the map screen.
2.	Select: Stop or Pause.

NOTE

When selecting a new route, the system provides a notification to either add or replace the existing route. There is no need to manually cancel the current route when adding or replacing it with a new route.

1	Repeat navigation instruction
2	Pause or stop route

Figure 4. Navigational Instruction

Canceling a Route: Voice Command

1.	Press: Voice Recognition switch on left hand control.
2.	Speak: Cancel route guidance.

Showing a Planned Route

NOTE

An entered route is displayed before committing to the route.

1.	Navigate: Home > Navigation.
2.	Select a Destination to route.
3.	Select: Options.
4.	Select: Show Route. The map shows the entire highlighted route.
5.	To commit to the route, select Back twice.
6.	Select: Go.

Simulating a Route

A route simulation can be viewed before committing to the route. The route simulation can only be used while the motorcycle is not moving.

1.	Navigate: Home > Navigation.
2.	Select a Destination to route.
3.	Select: Options.
4.	Select: Simulate Route. The route simulation is played on the map. Audible turn guidance will also be played.
5.	To commit to the route, select Back twice.
6.	Select: Go.

Calling a Destination: Route Active

There are occasions when calling a destination is helpful to determine operating hours or get information.

1.	With a phone connected and a route active on the map, select the Menu button.
2.	Select: Destination.
3.	Select: Call.

Calling a Destination: Route Not Active

1.	With a phone connected, select a destination (such as a POI).
2.	Select: Call. This is on the Destination screen.

Saving A Destination

NOTE

When the current destination list consists of more than one destination, it may have originated as either a Ride, or from the user adding one or more stopovers one at a time, or both.

The current location is stored as a Saved destination or can be saved as the Home destination when the option is displayed.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select a destination (such as a POI, address, recent destination or GPS coordinate).
4.	Select: Save. This is after the route is calculated.
5.	From Save To screen, select Saved List. a. From Destinations screen, select Save As Ride. b. Enter: Name to be saved as Destination.
6.	Select: OK.

Saving A Destination: Home

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Go Home.
4.	From Set Home screen, select a destination (perform a search, select a recent destination, select a POI or a Saved file).
5.	Select: Save.
6.	Select: As Home.

Saving Current Location

The current location is stored as a Saved Destination or can be saved as the Home Destination when the option is displayed.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: Location.
4.	Select: Save.
5.	From Save To screen, select Saved List. a. From Add to Saved Destinations? screen, select Yes. b. Enter: Name to be saved as Destination.
6.	Select: OK.