Rides are useful when visiting a number of POIs during an extended ride, planning rides with intermediate destinations (waypoints) or when planning a ride with restaurants and overnight lodging. The number and limit of Rides can only be determined by the amount of storage space available in the system. Each ride can include up to 400 destinations (waypoints).

A ride can be created using the navigation menus or by creating a ride on the map screen. Rides can also be imported from Ride Planner which is available for domestic (DOM) markets only. See Navigation → Importing a Route.

Creating a Ride: Using Menus

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Carousel to: Rides.
4.	Select: New.
5.	Input: Name of your ride and select OK.
6.	Select: Edit.
7.	Select: Add destination.
8.	Select: Search, Map, Recent, Saved, POI's or Contacts. Use one of the methods to enter a destination.
9.	Select: Add in the Destination screen.
10.	Select: Start Route.

Creating a Ride: Using Map

1.	Navigate: Home > Navigation.
2.	With map displayed, press touchscreen.
3.	Scroll to a POI or location on the map.
4.	Select: Go (upper right corner).
5.	Select: POI or location to confirm.
6.	Select: Options. Adjust ride preferences if needed.
7.	Select: Go.

Round Trip

When the Round Trip function is enabled, the system calculates a return route to the original position of the vehicle. The round trip feature can only be enabled before a route is activated.

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Settings.
4.	Select: Round Trip.

Editing a Ride: Adding Waypoints In Menu

1.	Navigate: Home > Navigation.
2.	Select: Search.
3.	Select: Rides.
4.	Select current ride destination.
5.	Select: Edit.
6.	Select: Add Destination.
7.	Enter a destination (address, POI, recent destination, saved location or intersection).
8.	Select: Add.
9.	Screen: Add Another Destination. a. Select: No. System returns to ride screen. b. Select: Yes. Add waypoints as needed.
10.	Reorder waypoints as needed.
11.	Select: Start Route.

Editing a Ride: Adding Waypoints On Map

NOTE

A Ride must be already programmed into the radio.

1.	Navigate: Home > Navigation.
2.	With map displayed, press touchscreen.
3.	Scroll and select a POI or location on the map between the start and end of the ride.
4.	Select: Go (upper right corner).
5.	Select: POI or location to confirm.
6.	Select: Route.
7.	Select: Add.
8.	Select: Go.

Editing a Ride: Reordering Waypoint

NOTE

There has to be a minimum of three destinations pre-populated in the Rides for this operation to work.

Navigate: Home > Navigation.

Select: Search.

Select: Rides.

Select a ride from list.

Select: Edit.

Select: Reorder.

See Figure 1. Select a destination (1) to reposition.

1	Select destination

Figure 1. Select Destination

See Figure 2. A double arrow (2) will appear on the selection meaning it is ready to move.

2	Double arrow

Figure 2. Double Arrow

See Figure 3. Select order of destination (3) by pressing the position where it needs to be moved.

3	Select order of destination

Figure 3. Move Destination

10.

Back out to ride screen.

11.

Select: Start Route.

Editing a Ride: Skipping Next Waypoint

1.	With an active route, select Menu.
2.	Select: Skip.
3.	Select: Yes.

Editing a Ride: Skipping Waypoint

1.	With an active route, select Menu.
2.	Select: Destination.
3.	Select: Edit.
4.	Select: Remove Destination.
5.	Select: Waypoint to skip.
6.	Select: Yes. The system removes the waypoint from the current route. However, the waypoint is not removed from the originally stored ride.