See Figure 1. The navigation system can provide traffic information when RDS Traffic (TMC) or SiriusXM Traffic is equipped on the vehicle and available in the region. When traffic is enabled, the map shows traffic flow and events along the currently selected route. Table 1 and Table 2 for traffic icon descriptions.

The system also stores a list of all traffic events that are nearby or along the active route. When an event (such as an accident or lane closure) is discovered along the current route, the navigation system notifies of the event and may attempt to calculate an alternate route. The system will either prompt to make the change or will automatically adjust the route, according to the system settings.

1	Lane guidance
2	Traffic event
3	Road sign
4	Traffic flow
5	POI (point of interest)

Figure 1. Traffic

Table 1. Traffic Conditions

COLOR	ICON	DESCRIPTION
Green overlay	Thin line	Free flowing traffic
Yellow overlay	Thin line	Slow traffic
Red overlay	Thin line	Stopped
Magenta overlay	Thick line	Active route
Teal overlay	Thick line	Recorded trail

Table 2. Traffic Conditions

ICON (NA)	ICON (EU)	DESCRIPTION
		Accident
		Construction
		Warning
		Narrow road
		Security checkpoint
		Weather
		Frost
		Blockage
		Slippery
		Traffic
		Heavy traffic
		Information
		Wind

Turning Traffic On/Off

On equipped vehicles, traffic automatically turns on with the RDS traffic feature or when selecting the SiriusXM traffic feature.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: SXM traffic or TMC traffic.
4.	Select: Settings.
5.	Check (enable) or uncheck (disable) the Traffic checkbox.

Traffic Notification Settings

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: SXM traffic or TMC traffic.
4.	Select: Settings.
5.	Select: Notification.
6.	Selections Displayed: a. Popup Beep: Beep when traffic popup is displayed. b. Message Filter: Choose the maximum distance of traffic events to be displayed in the event list.

Rerouting

The system can be configured to manually or automatically select a new route based on traffic data. The system will only provide a new route when it is calculated to be at least five minutes faster than the current route.

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: SXM traffic or TMC traffic.
4.	Select: Settings.
5.	Select: Re-route to Off or Auto. a. Auto: The system will automatically adjust the route according to traffic data. b. Off: The system will not prompt with any new routes based on traffic data.

Traffic Event List: RDS Traffic

If a route is active, the system displays traffic events along the route. If a route is not active, the system displays all nearby traffic events.

Navigate: Home > Navigation.

Select: Menu.

Select: SXM traffic or TMC traffic.

See Figure 2. Select traffic message (1) from list.

1	Select traffic message

Figure 2. Traffic List

See Figure 3. The traffic message (2) is displayed. Select message on screen to hear voice recognition.

Select: Map. This will display the event location on the map.

2	Traffic message
3	Map icon

Figure 3. Traffic Message

Maneuvers: Turn-By-Turn Instructions

While the route is active a list of turns will be displayed to your destination.

1.	Navigate: Home > Navigation.
2.	NOTE Select the next turn displayed at the bottom of the map as a shortcut to bypass Steps 2 and 3. Select: Menu. This must be done in an active route.
3.	Select: Maneuvers. A list of all turns in the route are displayed.
4.	Selecting a next turn from the maneuvers list displays the following options: a. Avoid: The system calculates new directions to avoid the selected road. b. Zoom: The map displays the selected maneuver on the map. c. OK: Returns to the list of maneuvers.

Maneuvers: Avoid a Road

NOTE

This must be done in an active route.

1.	Navigate: Home > Navigation.
2.	NOTE Select the next turn displayed at the bottom of the map as a shortcut to bypass Steps 2 and 3. Select: Menu.
3.	Select: Maneuvers. A list of all turns in the route are displayed.
4.	From the displayed list, scroll and select a turn that you would like to perform a detour.
5.	Select: Avoid. The system calculates new directions to avoid the selected road.
6.	Select: Yes. A new detour route is calculated and displayed in the list.
7.	Select: Back. This sends you back to the active map screen.

Maneuvers: Zoom

NOTE

This must be done in an active route.

1.	Navigate: Home > Navigation.
2.	NOTE Select the next turn displayed at the bottom of the map as a shortcut to bypass Steps 2 and 3. Select: Menu. This must be done in an active route.
3.	Select: Maneuvers. A list of all turns in the route are displayed.
4.	From the displayed list, scroll and select a turn that you would perform a Zoom.
5.	Select: Zoom. The map shows the maneuver with details on the bottom of the screen.
6.	Select: Previous/Next Maneuvers arrow. This will display the previous or next turn from the list.

Maneuvers: Restoring an Avoided Road

NOTE

This must be done in an active route.

Navigate: Home > Navigation.

NOTE

Select the next turn displayed at the bottom of the map as a shortcut to bypass Steps 2 and 3.

Select: Menu. This must be done in an active route.

Select: Maneuvers. A list of all turns in the route are displayed.

See Figure 4. Select: Avoid road.

1	Avoided road

Figure 4. Avoided Road

Select the road that was avoided. This would be the Avoid a Road selection that was made in a previous topic in this section.

See Figure 5. Select: Detour.

2	Detour icon

Figure 5. Detour Icon

Select: Yes. When asked to Restore this Maneuver?

Select:

a. Back Once: This returns rider back to maneuver list.

b. Back Twice: This returns rider back to map.

Lane Guidance

See Figure 6. When an upcoming turn or road divergence is required on a multi-lane highway, the map displays lane guidance arrows to suggest the proper lanes to use. Safely change to the suggested lane and follow the direction of the white arrows.

When approaching the turn, the system shows a representation of the signposts and upcoming road junction. Continue to follow the guidance of the white arrows.

1	Lanes required for next turn (white arrows)
2	Other lanes (grayed out)
3	Next turn guidance
4	Direction and highway information

Figure 6. Lane Guidance

Trip Summary

NOTE

This must be done in an active route.

A summary of the current route can be displayed at any point during a ride. The summary shows start and end time, mileage information and other data.

1.	Select: Info. This is on the radio's faceplate.
2.	See Figure 7. Select: Trip Summary.

1	Average speed/MPG
2	Distance traveled
3	Fuel used/stops
4	Destination arrival date
5	Time spent traveling
6	Destination start date

Figure 7. Trip Summary Screen

Low Fuel Alert

When the vehicle detects low fuel, the radio shows an alert and prompts to search for nearby fuel stations. The low fuel alert automatically displays even when the radio is turned off.

Figure 8. Low Fuel Alert

GPS Information

1.	Navigate: Home > Navigation.
2.	Select: Menu.
3.	Select: Location. The system displays the GPS coordinates and address for the current location (if available).
4.	Select: GPS. The system displays coordinates, elevation, signal and position information. See Figure 1.

Figure 9. GPS Information