Some features and functions shown are model and/or region-specific.
See vehicle owner's manual for functionality of other hand control switches.
See
Figure 1. The
Home/Volume/Previous/Next five-way switch operates radio features on equipped vehicles.
Home: Press to display the Home screen. Press again to display current audio source (tuner station, media file, or phone screen).
Previous/Next: Tap left or right to select previous/next radio frequency or media file.
NOTE
A one second press will seek the next transmitting station.
A long press will accelerate through frequencies, or fast forward/rewind through media files.
Volume: Press up to increase volume or down to decrease volume to speakers or rider headset. Volume control can also unmute audio and resume media.
NOTE
Unlike the Mute switch, decreasing volume to zero does not pause media.
Volume output is also affected by the speed volume setting. See
Setup → Speed Volume.
CB, intercom, phone calls and system prompts have independent volume levels. Adjust volume for these different audio sources while they are active. See appropriate sections for each of these functions for operation.
Voice Recognition: This switch activates voice recognition features on equipped vehicles. With a headset connected, press
Voice Recognition switch. The radio beeps and shows a list of available commands. Speak desired command into headset microphone. See
Communications → Voice Recognition.
To cancel voice recognition, press and hold Voice Recognition switch for three seconds, or press Home hand control switch.
Figure 1. Left Hand Control Audio Functions (typical)
Table 1. Left Hand Control Audio Functions
ITEM | ICON | NAME | FUNCTION |
---|
1 | | Home | Short Press: Toggles between current screen and Home screen. Long Press: Toggles the Quick Jump screen. |
2 | | Previous /Seek Down | Media: Previous media file. Tuner: Tune/seek down. |
3 | | Next/Seek Up | Media: Next media file. Tuner: Tune/seek up. |
4 | | Volume Up | Increases volume. |
5 | | Volume down | Decreases volume. |
6 | | Voice Recognition | Initiates a voice recognition session. Also, a long press initiates Siri for Bluetooth paired iPhone or Apple CarPlay when a headset is connected. |
Quick Jump: On left hand control do a long press on the
Home switch and this will display the
Quick Jump screen. Use the left or right hand control switch to make selection. See
Figure 2.
Figure 2. Quick Jump