See Figure 1. Remove screw (1) from the passenger pillion (2).

Slide the pillion forward to release from the shoulder bolt (7).

Remove the shoulder bolt (7), seat strap (3), and shoulder washer (8).

Slide seat (4) toward the rear of the motorcycle and remove.

Put seat on frame backbone.

See Figure 1. Slide seat (4) toward front of motorcycle, engaging front tab of seat under the fuel tank mount.

Align tab on rear of seat, holes in seat strap (3), and washer (8) with the hole in the fender.

Install shoulder bolt (7) and tighten securely.

Slide pillion (2) through seat strap and align the slot under the pillion with the head of the shoulder bolt (7).

Slide pillion backward until firmly secured on the shoulder bolt.

Install screw (1) and tighten securely.

Pull up on seat, pillion and seat strap to verify that everything is properly secured.

See Figure 1. Remove screw (1).

For two-up seats, raise seat slightly and remove nut (9) and washer (10) from mounting stud under seat. Remove seat strap (3).

Slide seat to the rear of the motorcycle and remove.