1. See Figure 2. Remove snap plug (1) on top of visor (2).
a. See Figure 1. Insert a small screwdriver through hole (1) on left side under visor (2)
b. Push up on plug to remove.
2. See Figure 2. Loosen headlamp clamp nut (3).
3. Adjust headlamp vertically to aim it at horizontal line. At same time, adjust headlamp horizontally to aim beam straight ahead.
4. Tighten headlamp clamp nut to 14–27 N·m (120–240 in-lbs) after lamp is properly positioned.
5. Install snap plug (1) in headlamp visor (2).
1Hole
2Visor
3Headlamp
Figure 1. Headlamp Visor: FXDL Models
1Snap plug
2Headlamp visor
3Clamp nut
Figure 2. Headlamp: FXDL Models