WARNINGThe automatic-on headlamp feature provides increased visibility of the rider to other motorists. Be sure headlamp is on at all times. Poor visibility of rider to other motorists can result in death or serious injury. (00030b)
See the YOUR OWNER'S MANUAL section at the beginning of this manual. Be sure to record all your key numbers in the space provided at the front of this book.
The ignition switch controls electrical functions of the motorcycle.
NOTICE
Protect your vehicle against theft. After parking your motorcycle, lock the steering head and ignition switch. Failure to lock your motorcycle can result in theft and/or equipment damage. (00491c)
WARNINGDo not operate vehicle with forks locked. Locking the forks restricts the vehicle's turning ability, which could result in death or serious injury. (00035a)
NOTICE
Do not lubricate barrel locks with petroleum based lubricants or graphite. Inoperative locks may result. (00152a)
NOTICE
Turn the ignition switch to the OFF position before locking the motorcycle. Leaving the switch in the ACC position will keep the instrument lights on and result in a discharged battery. (00492b)
To review the functions of each switch position, refer to Table 1.
See Figure 1. Unlock the switch with the ignition key, and rotate the switch to the desired position.
Remove the key before operating the motorcycle, and after parking the motorcycle and locking the switch. The key may fall out if it is left in the switch.
NOTE
- The lamps operate when the switch is in the IGN position, as required by law in some localities.
- The ignition key also fits the front fork lock.
Table 1. Ignition Switch
SWITCH POSITION | REMOVE KEY | FUNCTIONS |
|---|---|---|
OFF | Yes | Turns off ignition, lamps and accessories. Motorcycle is turned off and cannot be started. |
ACC | Yes | Turns on accessories. Hazard warning flashers can be
operated. Instrument lamps are on. Brake lamp and horn
can be activated. Switch can be locked in the ACC position. NOTE: When switching to the ACC position, a startup
diagnostic performs a systems check. The instrument
background lighting illuminates, gauge needles sweep
their full range of motion and the battery, security,
coolant temperature and check engine indicator lamps
illuminate. |
IGN | Yes | Turns on ignition, lamps and accessories. |
| 1 | Accessory position |
| 2 | OFF position |
| 3 | Ignition position |
Figure 1. Ignition Switch