See Figure 1. The procedure for removing the side cover is similar for the left and right sides.
NOTE
The right side cover has one mounting stud and two screws, left side cover has two mounting studs and one screw.
  1. Remove: Remove screw(s) (1) and pull the side cover (2) from the mounting stud(s) (3).
  2. Install: Align the side cover grommets with the mounting stud(s) (3) on the frame and press the side cover (2) until the mounting stud(s) are fully seated in grommets. Secure the side cover with the screw(s) (1). Tighten to 2.7–4 N·m (24–35 in-lbs)
1Screw and washer (2)
2Right side cover
3Mounting stud
Figure 1. Right Side Cover