Chirp Mode
Vehicles with a siren can be set to chirp upon arming and disarming. In chirp mode, the siren sounds two chirps when arming, and a single chirp when disarming.
Chirpless Mode
In chirpless mode, the siren does not chirp on arming or disarming.
The siren still provides warning chirps and sounds the alarm if the motorcycle is moved without the fob present.
Switching Modes
Perform the following to switch between chirp and chirpless modes.
  1. With the security fob present, set the OFF/RUN switch to RUN.
  2. When the security lamp turns off, set the OFF/RUN switch to OFF.
  3. When the security lamp turns off (but before the turn signals flash twice), immediately set the OFF/RUN switch to RUN.
  4. When the security lamp turns off, immediately set the OFF/RUN switch to OFF.
  5. When the security lamp turns off (but before the turn signals flash twice), immediately set the OFF/RUN switch to RUN. The system changes mode. The siren chirps or remains silent accordingly.
Disconnecting Power
To disconnect the battery or remove the main fuse and prevent the siren from sounding.
  1. Verify that the fob is present.
  2. Set the OFF/RUN switch to RUN.
  3. Pull the main fuse from its holder or disconnect the battery.
NOTE
Set the OFF/RUN switch to OFF before installing main fuse.