See Figure 1. The mode select (MODE SEL) switch is located on the right handlebar switch assembly.
UP/MODE SEL/DN Switch
MODE SEL
With the radio power ON, press and release the MODE SEL switch to sequence between the radio bands.
When a audio CD/MP3 disc is inserted into the CD player the CD function is added to the selections. When a 3.5 mm (⅛ in) connector is plugged into the AUX input port the AUX function is added to the selections.
The LCD display indicates the function selected.
UP/DN
In the receiver mode: UP/DN allows up or down radio station SEEK tuning.
In CD/MP3 mode: UP/DN changes tracks and performs fast advance and fast reverse.
In the CB mode: UP/DN changes the CB channel.
In the Intercom mode: UP/DN changes the voice activated microphone (VOX) sensitivity.
In the AUX mode: The UP/DN switch is inactive.
For a detailed description of the various modes, see ADVANCED AUDIO SYSTEM → Receiver Operation.
Table 1. Receiver Frequency Bands
MARKET
BAND
FREQUENCY
STEPS
Domestic
AM
530-1700 kHz
10 kHz
FM
87.75-107.9 MHz
200 kHz
WB
162.400-162.550 MHz
25 kHz
NOTE
The intercom and CB can be activated at the same time with the receiver modes. The intercom and CB signals are passed to the audio circuits only if the signal strength exceeds the threshold established by CB squelch or VOX microphone sensitivity levels. Depending on the position of the speaker control switch in the fairing switch cap, the receiver function, the CB, and the VOX microphone can be heard in the headsets simultaneously. See ADVANCED AUDIO SYSTEM → Intercom Operation and ADVANCED AUDIO SYSTEM → CB Operation.
1UP/MODE SEL/DN
Figure 1. RH Audio Controls