Removal
See Figure 1. All Sportster models have a forward tab underneath the seat on the frame back.
- Remove screw to detach seat from rear fender.
- Push seat forward to release keyhole from post on frame.
- Lift up on seat to release tongue from frame.
- If applicable, inspect passenger strap for damage or excessive wear.
NOTE
The passenger straps are secured to the seat.
Installation
| 1. | See Figure 1. Slide seat forward until the tongue (1) fits snugly in frame. | |
| 2. | Push seat forward and press firmly in center until keyhole on underside of seat locks firmly to post on frame. | |
 WARNINGAfter installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
| 3. | Pull up on seat to verify that it is locked in place. | |
| 4. | Install screw and fasten seat mounting bracket to top of rear fender. | |
| 5. | Tighten mounting bracket screw. | |
| 6. | Pull up on seat again to verify that it is properly secured, in all three mounting points. |
| 1 | Connection point |
Figure 1. Seat: Sportster Models