The Personal Identification Number (PIN) is a number that can be used to disarm the security system in case an assigned fob is misplaced, fails or if the fob cannot communicate with the motorcycle because of electromagnetic interference.
A PIN is a five-digit number (1-9, no zeros).
Changing the PIN
To maintain security, the rider can change the PIN at any time. Refer to Table 1.
Table 1. Changing the PIN
STEP
NO.
ACTION
WAIT FOR CONFIRMATION
NOTES
1
Select a 5-digit (1 thru 9) PIN and record on the wallet card from owner's manual.
2
With an assigned fob present, turn the OFF/RUN switch to OFF.
3
Turn the ignition switch to IGN.
4
Cycle the OFF/RUN switch twice: RUN - OFF - RUN - OFF - RUN.
5
Press left turn signal switch 2 times.
ENTER PIN will scroll through the odometer window.
6
Press right turn signal switch 1 time and release.
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.
7
Enter first digit of new PIN by pressing and releasing the left turn signal switch until the selected digit appears.
8
Press right turn signal switch 1 time and release.
The new digit will replace the current in odometer window.
9
Enter second digit of selected PIN by pressing and releasing the left turn signal switch until the selected digit is present.
10
Press right turn signal switch 1 time and release.
The new digit will replace the current in odometer window.
11
Enter third digit of the selected PIN by pressing and releasing the left turn signal switch until the selected digit is present.
12
Press right turn switch 1 time and release.
The new digit will replace the current in odometer window.
13
Enter fourth digit of new PIN by pressing and releasing the left turn signal switch until the selected digit is present.
14
Press right turn switch 1 time and release.
The new digit will replace the current in odometer window.
15
Enter fifth digit of the new PIN by pressing and releasing the left turn signal switch until the selected digit is present.
16
Press right turn switch 1 time and release.
The new digit will replace the current in odometer window.
17
Turn the OFF/RUN switch OFF, then turn the ignition switch to OFF.
Pushing the OFF/RUN switch to OFF stores the new PIN in the module.