Removal
NOTE
To allow for reuse, install lumbar pad screws into back of lumbar pad after removal.
  1. See Maintenance and Lubrication → SEAT → Seat. Remove seat (11).
  2. Remove screws (16) and washers (15) from the lumbar pad (13).
  3. Remove screws (12) from the nameplate (14).
  4. Remove nameplate from lumbar pad.
  5. Place nameplate on seat (11).
  6. Install screws into nameplate. Tighten screws.
Installation
  1. Remove screws from nameplate.
  2. Place nameplate on lumbar pad.
  3. Install screws in nameplate. Tighten screws.
  4. Insert lumbar pad on seat.
  5. Install screws and washers to lumbar pad. Tighten screws.
  6. Install seat.