The security system allows remote arming via the key fob at anytime. However, if the system is remotely disarmed (with the key fob) but the ignition key is not turned ON within 30 seconds, the system will rearm itself when auto-arming is enabled.
To set the auto-arming selection, refer to Table 1.
NOTE
Auto-arming configuration cannot be altered on international vehicles.
Table 1. Auto-arming Configuration (Not Available on International Vehicles)
STEP
NO.
ACTION
WAIT FOR CONFIRMATION
NOTES
1
Turn IGN key ON-OFF-ON-OFF-ON
2
Press left turn switch 2 times and release
2 or 3 flashes turn signals & indicators depending on vehicle configuration
(See BATTERY DISCONNECTS AND CONFIGURING section)
2 flashes - North American/Domestic configuration security system
3 flashes - international configuration security system
3
Press and hold key fob button until confirmation is received
1 flash turn signals & indicators
4
Press and hold key fob button until confirmation is received
2 flashes turn signals & indicators
5
Press left turn switch 1 time and release
Turn signals & indicators flash to indicate the current option selected
1 flash - auto-arming disabled
2 flashes - auto-arming enabled
6
Press and release left turn switch to advance through options
Turn signals & indicators flash to indicate the new option selected
1 flash - auto-arming disabled
2 flashes - auto-arming enabled
7
Turn IGN key OFF