Removal
NOTE
- Inspect filter at proper intervals. When operated under dusty conditions, inspect more often. Refer to Maintenance Scheduling → Service Records → Regular Service Intervals: 2016 Harley-Davidson Dyna Models.
- A slot in the backside of the clamp cover allows screwdriver access.
- See Figure 1. Loosen the hose clamp inside the clamp cover.
- Separate the filter from the air tube.
Figure 1. Air Filter Band Clamp: FXDLS
Installation
NOTICE
Install air filter before running engine. Failure to do so can draw debris into the engine and could result in engine damage. (00207a)
| 1. | See Figure 2. If removed, install the clamp (2) around the filter (3) neck. | |
| 2. | Install the filter onto the intake tube (1) until it is seated over the groove. NOTE To prevent damage to the filter backplate, hold the worm drive in the approximate center of the notch when tightening the clamp. | |
| 3. | Tighten the clamp around the filter flange to 3.4–4.5 N·m (30–40 in-lbs). |
| 1 | Intake tube |
| 2 | Hose clamp |
| 3 | Filter element |
Figure 2. Air Filter: FXDLS