1. Turn ignition switch to ON or ACC.
  2. See Figure 1. Press and release the TRIP switch until time (hour and minutes) is displayed. Press and hold the TRIP switch until 12HR (1) begins to blink in the speedometer display window. Release the switch.
  3. Press and release the TRIP switch once to advance to a blinking 24HR or military style time display. Each time you press and release the switch, the display switches between 12HR and 24HR.
  4. When the desired time format (12HR or 24HR) is displayed, press and hold the TRIP switch until the hours display (2) is blinking.
  5. Press and release the TRIP switch repeatedly to advance the hours.
  6. When the correct hour is displayed, press and hold the TRIP switch until the minutes display (3) starts blinking.
  7. Press and release the TRIP switch repeatedly to advance the minutes display.
  8. When the correct minutes are displayed, press and hold the TRIP switch until the display advances to the selection of AM or PM.
    9. NOTE
    AM or PM does not appear in the regular time display. The motorcycle uses the selection for diagnostic purposes.
  9. In the 12HR display, AM or PM flashes. Select AM or PM with the TRIP switch. Press and hold the switch for five seconds.
  10. Turn ignition switch OFF.
Figure 1. Setting Time