Removal
  1. See Figure 1. Remove the screws and washers (1).
  2. Pull the speed screen posts (3) away from the rubber grommets (4) in the lower bracket.
Installation
1. See Figure 1. Align the speed screen posts (3) with the rubber grommets (4) in the lower bracket.
2. Press the posts into the rubber grommets.
3. Align the clips (2) in the speed screen with the threaded holes in the upper bracket.
4. Install the screws and washers (1). Tighten to 2.3–3.3 N·m (21–29 in-lbs).
1Screw and washer (2)
2Clip (2)
3Post (2)
4Rubber grommet (2)
Figure 1. Speed Screen: FXDLS