| 1. | See Maintenance and Lubrication → Checking Transmission Lubricant Level → Transmission Filler Plug. Remove transmission filler plug/dipstick. | |
NOTICE When draining or adding lubricant, do not allow dirt, debris or other contaminants to enter the engine. (00198a)  WARNINGBe sure that no lubricants or fluids get on tires, wheels or brakes when changing fluid. Traction can be adversely affected, which could result in loss of control of the motorcycle and death or serious injury. (00047d) | ||
| 2. | See Figure 1. Remove transmission drain plug and drain lubricant into a suitable container. NOTE Dispose of transmission lubricant in accordance with local regulations. | |
| 3. | Inspect O-ring on drain plug for tears or damage. Replace as required. Wipe any foreign material from plug. | |
NOTICE Do not over-tighten filler or drain plug. Doing so could result in a lubricant leak. (00200b) | ||
| 4. | Install drain plug with O-ring. Tighten to 19–28.5 N·m (14–21 ft-lbs). Do not over-tighten. | |
| 5. | Fill the transmission with 0.83 L (28 fl oz) of recommended Harley-Davidson lubricant. Refer to Maintenance and Lubrication → Checking Transmission Lubricant Level → Recommended Lubricant. | |
| 6. | See Maintenance and Lubrication → Checking Transmission Lubricant Level. Check lubricant level and add lubricant to bring the level between the ADD and FULL marks. | |
| 7. | Install filler plug/dipstick and tighten to 2.8–8.5 N·m (25–75 in-lbs). |
| 1 | Engine oil drain plug and O-ring |
| 2 | Transmission drain plug |
Figure 1. Oil Pan