Check the transmission lubricant level with engine turned off and motorcycle resting on jiffy stand on level surface.
NOTE
Allow vehicle to rest for a few moments before checking lubricant level. This will allow lubricant level to normalize.
| 1. | See Figure 1. Remove transmission lubricant filler plug/dipstick. Wipe dipstick clean. | |
| 2. | Insert dipstick into transmission with filler plug/dipstick resting on threads. Do not thread in. | |
| 3. | See Figure 2. Remove filler plug/dipstick and check lubricant level on dipstick. If lubricant level is at or below the ADD mark on the dipstick, add only enough lubricant to bring level to between ADD mark and FULL mark on dipstick. | |
| 4. | Install filler plug/dipstick. Tighten to 2.8–8.5 N·m (25–75 in-lbs). |
Figure 1. Transmission Filler Plug/Dipstick Location
| 1 | Add |
| 2 | Full |
Figure 2. Transmission Filler Plug/Dipstick Lubricant Level
Table 1. Recommended Lubricant
MODEL | LUBRICANT | REFILL QTY. * |
|---|---|---|
All | FORMULA+ TRANSMISSION AND PRIMARY CHAIN LUBRICANT or SYN3 20W50 OIL | 0.83 L (28 fl oz) |
* Approximate. Check and add as needed to bring level within specification. | ||