| 1. | Locate looped snap on seat strap. | |
| 2. | See Figure 1. Place seat through the seat strap. | |
| 3. | Snap loop together to tighten seat strap. | |
| 4. | Slide seat toward front of motorcycle until the tongue locks into the open end of the frame back. | |
| 5. | Install the two seat (5) mounting fasteners to the frame; secure until snug. | |
| 6. | Install pillion mounting fastener on fender. Secure until snug. | |
| 7. | See Figure 4. Place seat strap bracket end over mounting fasteners in frame. | |
| 8. | See Figure 3. Pull up on strap bracket to ensure fit. Secure until snug. | |
After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
| 9. | See Figure 2. Pull up on seat to verify that it is properly secured. |
| 1 | Pillion |
| 2 | Seat mounting bracket |
| 3 | Pillion mounting fasteners |
| 4 | Driver seat |
| 5 | Seat mounting fasteners |
| 6 | Seat strap |