1. Bring an assigned fob within range.
2. Disconnect vehicle from charger.
3. Unlock fork.
4. Raise the jiffy stand.
5. See Figure 1. With security fob present, set the OFF/RUN switch to RUN (7).
6. Ensure twist grip is released.
7. Verify no propulsion interlock alerts are displayed. See Operation → Instruments.
NOTE
The vehicle has propulsion interlocks, Propulsion interlocks are conditions that must be met before propulsion can be enabled. Propulsion interlocks will be displayed on the Instrument Module (IM) when conditions are not met to enable propulsion.
8. Press and hold the start switch (3) until vehicle starting up icon appears on IM. See Operation → Indicators.
NOTE
Once propulsion is enabled the motorcycle will provide haptic feedback to the rider through the motor when the motorcycle is stopped. The rider will feel a slight pulsing in the motor similar to a heartbeat.
1Hazard warning
2Right hand control module
3Start
4Mode
5Off
6Twist grip
7Run
8Next
9Volume down
10Voice recognition
11Traction control
12Pause/play
13Previous
14Volume up
Figure 1. Right Hand Switch Module