For electrical problems, see an authorized LiveWire dealer who has the necessary parts and equipment to perform electrical services.
NOTE
- Fuses do not reset.
- Only replace a fuse with a fuse of the same rating.
- Use only automotive type ATO fuses as replacements.
Removing/Replacing Main Fuse
For removing or replacing the main fuse, see your authorized LiveWire dealer.
Replacing System/ABS Fuses
| 1. | Set OFF/RUN switch to OFF. | |
| 2. | Open seat. See Operation → Seat. | |
| 3. | See Figure 2. Remove fuse block from caddy on motorcycle. | |
| 4. | Remove the cover from the fuse block. | |
| 5. | See Figure 1. Remove the suspect fuse and inspect the element. Replace the fuse if the element is burned or separated. | |
| 6. | Install the fuse block cover so the tabs snap into place. | |
| 7. | Install fuse block to caddy. | |
| 8. | Close seat. See Operation → Seat. |
| 1 | 12V system power fuse 1 (10 A) |
| 2 | 12V system power fuse 2 (10 A) |
| 3 | ABS fuse (20 A) |
| 4 | Main fuse (40 A) |
Figure 1. Fuse Block
| 1 | Fuse box |
| 2 | Main fuse |
| 3 | Cover |
Figure 2. Main Fuse