Once armed, if the motorcycle is moved or lifted up off of its jiffy stand and the fob is not present, the alarm will warn the operator with three alternate flashes of the turn signals.

Within 4 seconds, if the motorcycle is back on its jiffy stand and no further motion is detected, the system will remain armed without activating the alarm.

If the motorcycle motion continues, the system will issue a second warning 4 seconds after the first.

If the security system is still detecting motion after a second warning, the system will activate the alarm.

When activated, the security system will alternately flash the four turn signals.

Duration: The alarm will stop within 30 seconds and if no motion is detected, the alarm will not restart.

However, if motorcycle motion continues the system will repeat the 30 seconds alarm and recheck for motion. The alarm will repeat this 30 seconds alarm cycle for 5 minutes (10 cycles) or until the alarm is deactivated.

Key fob: Bring the fob to the motorcycle. After the module identifies that the fob is present, the system will terminate the alarm.

PIN entry: Enter the Personal Identification Number (PIN) to deactivate the alarm. If an error is made while entering the PIN, wait until the alarm is between cycles to enter the PIN.