Two-up Seat
Remove
1. See Figure 1. Remove seat.
a. Insert key into seat lock (4) and turn clockwise.
b. Lift seat (1) from rear and remove.
Install
1. Install seat.
a. Align seat (1) with seat tongue (5).
b. Lower rear of seat until seat post (2) engages latch (3).
1Seat
2Seat post
3Latch
4Key cylinder
5Seat tongue
Figure 1. Two-up Seat
Solo Seat
Remove
1. See Figure 2. Remove seat.
a. Remove seat screws (2).
b. Lift front of seat (1).
c. Move seat forward and lift to remove.
Install
1. Install seat.
a. Align seat tabs (3) with frame tabs (4).
b. Move seat (1) to the rear to lock seat tabs and frame tabs together.
c. Lower front of seat into position.
d. Install seat screws (2). Tighten.
Torque: 7–9 N·m (62–80 in-lbs)
1Seat
2Seat screw (2)
3Seat tab (2)
4Frame tab (2)
Figure 2. One-Up Seat