Refer to Table 1. Regular maintenance must be performed at specified intervals to help keep your new Harley-Davidson motorcycle operating at peak performance and keep your new motorcycle limited warranty in force. Your authorized Harley-Davidson dealer knows best how to service your motorcycle with factory approved methods and equipment assuring you of thorough and competent workmanship.
Some maintenance items should be done at least once per year as specified, even if the next mileage interval has not been reached. In severe riding conditions, some maintenance items may need to be performed more frequently. Refer to the notes in Table 1.
NOTE
WARNING
Perform the service and maintenance operations as indicated in the regular service interval table. Lack of regular maintenance at the recommended intervals can affect the safe operation of your motorcycle, which could result in death or serious injury. (00010a)
WARNING
If you operate your motorcycle under adverse conditions (severe cold, extreme heat, very dusty environment, very bad roads, through standing water, etc.), you should perform the regular maintenance intervals more frequently to ensure the safe operation of your motorcycle. Failure to maintain your motorcycle could result in death or serious injury. (00094a)
Table 1. Regular Service Intervals: 2014 Sportster Models
ITEM SERVICED
PROCEDURE
1000 MI
1600 KM
5000 MI
8000 KM
10000 MI
16000 KM
15000 MI
24000 KM
20000 MI
32000 KM
25000 MI
40000 KM
30000 MI
48000 KM
35000 MI
56000 KM
40000 MI
64000 KM
45000 MI
72000 KM
50000 MI
80000 KM
NOTES
Electrical equipment and switches
Check operation
X
X
X
X
X
X
X
X
X
X
X
Front tire
Check pressure, inspect tread
X
X
X
X
X
X
X
X
X
X
X
1
Front wheel spokes
(if equipped)
Check torque
X
X
X
X
X
2, 3, 4
Front brake fluid
Inspect sight glass
X
X
X
X
X
X
X
X
X
X
X
5
Reservoir cover screw: front brake
Check torque
X
X
X
X
X
X
1, 2, 6
Steering head bearings
Adjust
X
X
X
X
X
X
2
Lubricate
X
2, 7
Throttle controls
Check, adjust and lubricate
X
X
X
X
X
X
X
X
X
X
X
2
Hand controls: upper and lower switch housing screws
Check torque
X
X
X
X
X
X
1, 2, 6
Air cleaner
Inspect, service as required
X
X
X
X
X
X
X
X
X
X
4
Engine oil and filter
Replace
X
X
X
X
X
X
X
X
X
X
X
1, 4
Primary chain
Check adjustment
X
X
X
X
X
X
X
X
X
X
X
Transmission lubricant
Replace
X
X
X
X
X
X
4
Oil lines and brake system
Inspect for leaks, contact or abrasion
X
X
X
X
X
X
X
X
X
X
X
1, 2
Fuel lines and fittings
Inspect for leaks, contact or abrasion
X
X
X
X
X
X
X
X
X
X
X
1, 2
Stabilizer link: engine bracket mounting screws, upper front
Check torque
X
X
X
X
X
X
1, 2, 6
Isolator mounting bolt and nut, front
Check torque
X
X
X
X
X
X
1, 2, 8
Rear brake fluid
Inspect sight glass
X
X
X
X
X
X
X
X
X
X
X
5
Reservoir cover screw: rear brake
Check torque
X
X
X
X
X
X
1, 2, 6
Brake pads and discs
Inspect for wear
X
X
X
X
X
X
X
X
X
X
X
Front axle nut
Check torque
X
X
X
X
X
X
1, 2, 6
Brakes: banjo bolt
Check torque
X
X
X
X
X
X
1, 2, 6
Jiffy stand
Inspect and lubricate
X
X
X
X
X
X
X
X
X
X
X
2, 4
Clutch
Check adjustment
X
X
X
X
X
X
X
X
X
X
X
2, 4
Brake and clutch controls
Check, adjust and lubricate
X
X
X
X
X
X
X
X
X
X
X
Rear wheel spokes
(if equipped)
Check torque
X
X
X
X
X
2, 3, 4
Rear tire
Check pressure, inspect tread
X
X
X
X
X
X
X
X
X
X
X
1
Rear fork bearings
Inspect every 48,000 km (30000 mi).
1
Drive belt and sprockets
Inspect, adjust belt
X
X
X
X
X
X
X
X
X
X
X
2
Rear axle nut
Check torque
X
X
X
X
X
X
1, 2, 6
Exhaust system
Inspect for leaks, cracks, and loose or missing fasteners or exhaust shields
X
X
X
X
X
X
X
X
X
X
X
1, 4
Battery
Check battery, terminal torque and clean connections annually.
1
Spark plugs
Replace every two years or every 30,000 mi (48,000 km), whichever comes first.
Front fork
Rebuild
2, 9
Fuel filter element
Replace every 160,000 km (100000 mi).
2
Road test
Verify component and system functions
X
X
X
X
X
X
X
X
X
X
X
NOTES:
1. Perform annually or at specified intervals, whichever comes first.
2. Should be performed by an authorized Harley-Davidson dealer, unless you have the proper tools, service data and are mechanically qualified.
3. Perform spoke tension check at 1,600 km (1000 mi), 8,000 km (5000 mi), 32,000 km (20000 mi) services and every 24,000 km (15000 mi) interval thereafter. Not all vehicles have spoked wheels. Consult appropriate topic in service manual.
4. Perform maintenance more frequently in severe riding conditions (such as extreme temperatures, dusty environments, mountainous or rough roads, long storage conditions, short runs, heavy stop/go traffic or poor fuel quality).
5. Change DOT 4 brake fluid and flush system every two years.
6. Attempt to turn the fastener using a torque wrench set to the minimum torque specification for that fastener. If the fastener does not rotate, the fastener torque has been maintained. No further attention is necessary. If fastener moves, tighten to specification.
7. Disassemble, lubricate and inspect every 48,000 km (30000 mi).
8. Attempt to turn the fastener using a torque wrench set to the minimum torque specification for that fastener. If the fastener does not rotate, the fastener torque has been maintained. No further attention is necessary. If the fastener moves, clean all locking material from the threaded hole. Replace the fastener with a new one or clean the original fastener threads and apply the appropriate locking agent (see appropriate procedure). Install fastener. Tighten to specification.
9. Disassemble, inspect, rebuild forks and replace fork oil every 80,000 km (50000 mi).
Table 2. Owner's Maintenance Records
SERVICE MILE INTERVAL
DATE
DEALER NUMBER
TECHNICIAN NAME
TECHNICIAN SIGNATURE
1,600 km (1000 mi)
8,000 km (5000 mi)
16,000 km (10000 mi)
24,000 km (15000 mi)
32,000 km (20000 mi)
40,000 km (25000 mi)
48,000 km (30000 mi)
56,000 km (35000 mi)
64,000 km (40000 mi)
72,000 km (45000 mi)
80,000 km (50000 mi)