Removal/Installation
WARNINGAfter installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b)
See Figure 1 and Figure 2. The passenger seat attaches with a single thumbscrew (1) at the rear and engages the seat mounting nuts (4) at the front.
To remove seat, remove pillion (2, 7) and seat mounting nuts (4). When installing seat, insert tongue at front of seat into the channel in the frame and install seat mounting nuts through holes in grab strap (3) and thread into mounting holes. Slide slots on passenger seat (2, 7) on to seat mounting nuts. Install thumbscrew (1) and tighten. Tighten seat mounting nuts (4).
| 1 | Thumbscrew |
| 2 | Pillion (FLST/FLSTC/FLSTF) |
| 3 | Grab strap (FLST/FLSTC/FLSTF) |
| 4 | Seat mounting nut (2) |
| 5 | Seat (FLST/FLSTC/FLSTF) |
| 6 | Seat (FLSTN) |
| 7 | Pillion (FLSTN) |
| 8 | Seat (FLSTFB) |
Figure 1. Seat: FLST/N/C/F/FB Models
Figure 2. Seat Mounting Stud