For electrical problems, see an authorized LiveWire dealer who has the necessary parts and equipment to perform electrical services.
NOTE
- Fuses do not reset.
- Only replace a fuse with a fuse of the same rating.
- Use only automotive type ATO fuses as replacements.
Removing/Replacing Main Fuse
For removing or replacing the main fuse, see your authorized LiveWire dealer.
Replacing System/ABS Fuses
| 1. | Set OFF/RUN switch to OFF. | |
| 2. | Remove top cover. See Service Procedures → Top Cover. | |
| 3. | See Figure 1. Remove fuse block from caddy on motorcycle. | |
| 4. | Remove the cover from the fuse block. | |
| 5. | See Figure 2. Remove the suspect fuse and inspect the element. Replace the fuse if the element is burned or separated. | |
| 6. | Install the fuse block cover so the tabs snap into place. | |
| 7. | Install fuse block to caddy. | |
| 8. | Install top cover. See Service Procedures → Top Cover. |
| 1 | Fuse block |
| 2 | Cover |
Figure 1. Fuse Block and Cover
| 1 | System (10 A) |
| 2 | Anti-lock Braking System (ABS) (10 A) |
| 3 | Main (40 A) |
| 4 | Fuse block |
Figure 2. Fuse Block