Regular Service Intervals

Service must be performed at specified intervals to keep your motorcycle operating at peak performance. Refer to Service Intervals for table.

Refer to Service Actions for service action definitions used in the service interval table.

NOTE

Whenever a vehicle is in for maintenance:
1. always check for and complete recalls and open product programs.
2. always verify that the latest calibration is installed.
After completing the final service interval, repeat the service schedule starting at the 8000 km (5000 mi) interval.

Service Intervals

COMPONENT	1600KM 1000MI	8000KM 5000MI	16000KM 10000MI	24000KM 15000MI	32000KM 20000MI	40000KM 25000MI	48000KM 30000MI	56000KM 35000MI	64000KM 40000MI	72000KM 45000MI	80000KM 50000MI
Service Intervals
Electrical equipment and switches Inspect
Front tire pressure and tread¹ Check
Front brake fluid level Check
DOT4 front brake fluid moisture content Check
Hand control switch housing screw torque^1,5,3 Check
Master cylinder and left side handlebar clamp screw torque^1,5,3 Check
Steering head bearings Adjust
Steering head bearings⁵ Lubricate
Coolant system Inspect
Coolant system freeze point Check
Coolant⁵ Replace
Radiator fins Clean
Transmission lubricant² Replace
High voltage cables⁵ Inspect
Rear brake fluid level Check
DOT4 rear brake fluid moisture content Check
Brake system fluid⁵ Replace	Flush brake system and replace DOT 4 hydraulic brake fluid every two years or sooner if moisture content is 3% or greater.
Brake system^1,5 Inspect
Brake pads and discs Inspect
Front axle nut torque^1,5,3 Check
Jiffy stand^5,2 Lubricate
Brake controls Lubricate
Rear tire pressure and tread¹ Check
Drive belt and sprockets⁵ Inspect
Drive belt tension⁵ Check
Rear axle torque^1,5,3 Check
12 volt battery⁴ Inspect
Front forks⁵ Rebuild
Road test to verify component and system functions Road Test
NOTES
1. Perform annually or at specified intervals, whichever comes first.
2. Perform maintenance more frequently in severe riding conditions. This includes extreme temperatures, dusty environments, mountainous or rough roads, long storage conditions, short runs, heavy stop/go traffic or poor fuel quality.
3. For torque instructions, see Shop Practices in the service manual.
4. Check battery, terminal torque and clean connections annually. Lubricate terminals with ELECTRICAL CONTACT LUBRICANT.
5. Should be performed by an authorized LiveWire dealer, unless you have the proper tools, service data and are mechanically qualified.

1600KM 1000MI	8000KM 5000MI	16000KM 10000MI	24000KM 15000MI	32000KM 20000MI	40000KM 25000MI	48000KM 30000MI	56000KM 35000MI	64000KM 40000MI	72000KM 45000MI	80000KM 50000MI

Service Intervals

Electrical equipment and switches

Inspect

Front tire pressure and tread

Check

Front brake fluid level

Check

DOT4 front brake fluid moisture content

Check

Hand control switch housing screw torque

Check

Master cylinder and left side handlebar clamp screw torque

Check

Steering head bearings

Adjust

Steering head bearings

Lubricate

Coolant system

Inspect

Coolant system freeze point

Check

Coolant

Replace

Radiator fins

Clean

Transmission lubricant

Replace

High voltage cables

Inspect

Rear brake fluid level

Check

DOT4 rear brake fluid moisture content

Check

Brake system fluid

Replace

Brake system

Inspect

Brake pads and discs

Inspect

Front axle nut torque

Check

Jiffy stand

Lubricate

Brake controls

Lubricate

Rear tire pressure and tread

Check

Drive belt and sprockets

Inspect

Drive belt tension

Check

Rear axle torque

Check

12 volt battery

Inspect

Front forks

Rebuild

Road test to verify component and system functions

Road Test


















Flush brake system and replace DOT 4 hydraulic brake fluid every two years or sooner if moisture content is 3% or greater.

Service Actions

Table 1. Service Action Definitions

ACTION	DEFINITION
Inspect	Carefully examine component for excess wear, abnormality, contact, or leaks.
Check	Verify the component is within the owner’s manual or service manual service limits. Adjust or repair as necessary.
Lubricate	Lubricate the component as specified in the owner’s or service manual with a LiveWire approved product.
Replace	Replace the component at the specified intervals.
Clean	Clean the component as specified in the owner’s or service manual.
Rebuild	Rebuild the component according to the procedures in the service manual.

Maintenance Records

Maintain a record of this service to keep your new motorcycle limited warranty in force. Refer to Table 2.

Table 2. Owner's Maintenance Records

SERVICE MILE INTERVAL	DATE	DEALER NUMBER	TECHNICIAN NAME	TECHNICIAN SIGNATURE
1,600 km (1,000 mi)
8,000 km (5,000 mi)
16,000 km (10,000 mi)
24,000 km (15,000 mi)
32,000 km (20,000 mi)
40,000 km (25,000 mi)
48,000 km (30,000 mi)
56,000 km (35,000 mi)
64,000 km (40,000 mi)
72,000 km (45,000 mi)
80,000 km (50,000 mi)