1. | Locate looped snap on seat strap. | |
2. | See Figure 1. Place seat through the seat strap. | |
3. | Snap loop together to tighten seat strap. | |
4. | Slide seat toward front of motorcycle until the tongue locks into the open end of the frame back. | |
5. | Install the two seat (5) mounting fasteners to the frame; secure until snug. | |
6. | Install pillion mounting fastener on fender. Secure until snug. | |
7. | See Figure 3. Place seat strap bracket end over mounting fasteners in frame. | |
8. | See Figure 3. Pull up on strap bracket to ensure fit. Secure until snug. | |
WARNING After installing seat, pull upward on seat to be sure it is locked in position. While riding, a loose seat can shift causing loss of control, which could result in death or serious injury. (00070b) | ||
9. | See Figure 2. Pull up on seat to verify that it is properly secured. |
1 | Pillion |
2 | Seat mounting bracket |
3 | Pillion mounting fasteners |
4 | Driver seat |
5 | Seat mounting fasteners |
6 | Seat strap |