It is possible to arm the security system without enabling the motion detector for one ignition cycle. This allows the vehicle to be moved in an immobilized state for transport.

The transport mode is used for moving the vehicle or transporting on a trailer with the security system armed and without tripping the alarm. When the vehicle is in the transport mode, the security system does not respond to motion detection.

To exit the transport mode, use the key fob to disarm the vehicle.
To enter the transport mode, refer to Table 1.

NOTE

Transport mode is especially useful when working on international vehicles. If it is not used, the alarm will activate under many typical service activities.

Table 1. Transport Mode

STEP NO.	ACTION	WAIT FOR CONFIRMATION	NOTES
1	Turn IGN key ON
2	Press and hold key fob button until confirmation is received	3 flashes turn signals & indicators
3	Turn IGN key OFF
4	Press and hold key fob button until confirmation is received	3 flashes turn signals & indicators	The vehicle can be moved without tripping the alarm