The tamper warning has four sensitivity settings:
The selection chosen controls the sensitivity of the security system in regard to short disturbances of the vehicle (i.e. someone bumps into the vehicle).
To set alarm sensitivity, refer to Table 1.
Table 1. Alarm Sensitivity Adjustment
STEP
NO.
ACTION
WAIT FOR CONFIRMATION
NOTES
1
Turn IGN key ON-OFF-ON-OFF-ON
2
Press left turn switch 2 times and release
1-4 flashes turn signals & indicators depending on vehicle configuration
(See BATTERY DISCONNECTS AND CONFIGURING section)
1 flash - Worldwide TSM, no security system
2 flashes - North American/Domestic configuration TSSM
3 flashes - Netherlands configuration TSSM (Dealer configurable only)
4 flashes - international configuration TSSM
3
Press and hold key fob button until confirmation is received
1 flash turn signals & indicators
4
Press left turn switch 1 time and release
Turn signals & indicators flash to indicate the current option selected
1 flash - extremely low
2 flashes - low sensitivity
3 flashes - medium sensitivity
4 flashes - high sensitivity
5
Press and release left turn switch to advance through options
Turn signals & indicators flash to indicate the new option selected
1 flash - extremely low
2 flashes - low sensitivity
3 flashes - medium sensitivity
4 flashes - high sensitivity
6
Turn IGN key OFF