NOTICE
Polycarbonate windshields/wind deflectors require proper attention and care to maintain. Failure to maintain polycarbonate properly can result in damage to the windshield/wind deflector. (00483e)
NOTICE
Use only Harley-Davidson recommended products on Harley-Davidson windshields. Do not use harsh chemicals or rain sheeting products, which can cause windshield surface damage, such as dulling or hazing. (00231c)
Removal
NOTE
Avoid contact with headlamp assembly to prevent cosmetic damage.
  1. See Figure 1. Move the TOP of the windshield assembly (1) forward, until the TOP bracket (2) notches slide away from the grommets (3).
  2. Carefully lift the windshield bracket BOTTOM notches off the bottom grommets.
Installation
  1. See Figure 1.Verify grommets (3) and brackets (2) are in place and in good condition.
    2. NOTE
    If damage or wear is noticed, see a Harley-Davidson dealer.
  2. Slide the BOTTOM windshield bracket (2) notches onto the bottom grommets (3).
  3. Slide the TOP bracket notches onto the top grommets.
NOTE
Ensure all four mounting points are fully seated into the mounting grommets.
1Windshield
2Bracket
3Grommet
Figure 1. Windshield Assembly