Removal
| 1. | See Figure 1. Remove fairing. a. Remove the screws and washers (1). b. Pull fairing forward to release mounting studs (2) from grommets (3). c. Remove fairing. |
Installation
| 1. | Install fairing. a. Place fairing over headlamp and align mounting studs and grommets. b. Push fairing straight back until fully seated. c. Align the clips (2) with holes in bracket. d. Install washers and screws (1). Tighten. 2.3–3.3 N·m (20–30 in-lbs) |
| 1 | Screw and washer (2) |
| 2 | Clip (2) |
| 3 | Stud (2) |
| 4 | Grommet (2) |
Figure 1. Fairing