See Figure 1. The procedure for removing the side cover is similar for left and right sides.
| 1. | Remove: Remove screw(s) (1) and pull side cover (2) from mounting stud(s) (3). | |
| 2. | Install: Align side cover grommets with mounting stud(s) (3) on the frame and press side cover (2) until mounting stud(s) are fully seated in grommets. Secure side cover with screw(s) (1). | |
| 3. | Tighten screws. Torque: 2.7–4.1 N·m (24–36 in-lbs) Side cover screw, vertical and single |
| 1 | Screw and washer (2) |
| 2 | Right side cover |
| 3 | Mounting stud |
Figure 1. Right Side Cover