1. See Figure 1. Remove screw (1).
2. Remove cover (2).
3. Remove nuts (3).
4. Remove bracket (4).
5. Remove filter element (5).
6. Hold the filter element up to a strong light source. The element is sufficiently clean when light is uniformly visible through the media.
7. If necessary, discard filter element and install a new element.
8. Install filter element (5).
9. Install bracket (4).
10. Install nuts (3). Tighten to 6–8 N·m (54–70 in-lbs).
11. Install cover (2).
12. Install screw (1). Tighten to 6–8 N·m (54–70 in-lbs).
1Screw
2Cover
3Nut (2)
4Bracket
5Filter element
6Backplate
7Washer (2)
Figure 1. Air Cleaner