Replacing Turn Signal Bulb
1. Remove main fuse. See Service Procedures → Fuses and Relays.
2. See Figure 1. Remove screw (5).
3. Pull lens (3) away from turn signal base (1).
4. Remove bulb (2).
5. Install new bulb (2).
6. Align tab (4) with turn signal base (1).
7. Install lens (3).
8. Install screw (5). Tighten to 0.6–0.8 N·m (5–7 in-lbs).
9. Install main fuse. See Service Procedures → Fuses and Relays.
1Turn signal base
2Bulb
3Lens
4Tab
5Screw
Figure 1. Turn Signal Bulb