It is possible to arm the security system without enabling the motion detector for one ignition cycle. The motorcycle can be moved in an armed state. The motorcycle cannot be turned on or started while in transport mode until the fob is present.
To Enter Transport Mode
  1. With security fob present, set the OFF/RUN/START switch to RUN.
  2. Set the OFF/RUN/START switch to OFF.
  3. Simultaneously press both the left turn signal and the flash-to-pass switches within five seconds of turning the OFF/RUN/START switch to OFF.
  4. See Figure 1. Once activated, a transport mode icon will be displayed on the IFCU to indicate that the security system is in transport mode.
Figure 1. Transport Mode Display
To Exit Transport Mode
With the fob present, set the OFF/RUN/START switch to RUN to disarm the system and exit transport mode.