See Figure 2. Vehicle off: Press the trip switch (4) to display the accumulated mileage in the odometer display in the Infotainment Control Unit (IFCU).

Vehicle in accessory/ignition mode: Press the trip switch to cycle through the widget displays.

High beam: See Figure 1. Push the headlamp switch up (2) to activate the high beam. The (blue) high beam indicator in the IFCU is lit when the high beam is on. Refer to Table 1.

Low beam: Press the headlamp switch down (1) to activate the low beam.

Flash-to-pass: When the headlamp low beam is on, press and release the headlamp switch (flash-to-pass) (3) to flash the high beam before passing another vehicle. The high beam indicator lamp in the IFCU is illuminated as long as the headlamp switch is pressed.

When in accessory mode, press the headlamp (flash-to-pass) switch to activate the headlamp. Refer to Table 1.

See Figure 2. The CRUISE/SET/RESUME switch assembly (2, 3, 15) automatically regulates the speed of the vehicle. See Operation → Cruise Control for detailed operation. Refer to Table 1.

CRUISE: Press the CRUISE OFF/ON button (3) to enable cruise control. The cruise control indicator in the IFCU lights orange. Pressing the CRUISE OFF/ON button again turns off cruise control, and the cruise control indicator turns off.

SET/-: With cruise control enabled, press SET/- (15) to set the cruising speed. The cruise control indicator in the IFCU lights green. While at cruising speed, press SET/- to decrease the regulated speed. Tapping SET/- decreases the speed by 1.6 km/h (1 mph). Holding SET/- down gradually decreases cruise speed.

RES/+: If cruise control is disengaged (such as a braking event), press RES/+ (2) to resume the previous cruising speed. While at cruising speed, press RES/+ to increase speed. Tapping RES/+ increases the speed by 1.6 km/h (1 mph). Holding RES/+ down gradually increases cruise speed.

Activate: See Figure 2. Press the left turn signal switch (11) to activate the left turn signal. Refer to Table 1.

Cancel (manual operation): If activated, press the left turn signal switch to cancel the left turn signal.

Cancel (automatic operation): If activated, the turn signal lamps automatically cancel when a full turn has been detected based on speed, acceleration and turn completion.

The lamps also cancel if the turn signal has been activated for a prolonged period while the motorcycle speed is greater than 11 km/h (7 mph). If the motorcycle is stopped or moving slower than this speed, the turn signal continues flashing.

See Figure 2. Press the horn switch (10) to operate the horn. The horn can be activated for up to 10 seconds at a time. If the horn switch is held for a longer period, the horn automatically deactivates. Refer to Table 1.

See Figure 2. The traction control switch (5) activates and deactivates the traction control system. Refer to Table 1.

Disable: Press switch for 1 second with engine running and vehicle stopped.

Enable: Press switch at anytime to resume traction control operation.

See Figure 2. The UP/DOWN/RIGHT/LEFT four-way switch set (6, 9, 7, 13) operates radio or media file features on equipped vehicles.

See Figure 2. Press the OK/Enter button (8) to approve or enter the currently highlighted section on the IFCU screen.

See Figure 2. Press the Back button (12) to return to the previous IFCU menu or function.

See Figure 2. Press and release the Main Menu/Bike Button (14): Cycle through the IFCU menus.

Long press: Display the IFCU Bike Function menu.