Compartment
WARNINGImproper loading of cargo or installation of accessories can affect motorcycle stability and handling, which could result in death or serious injury.
- Keep cargo weight concentrated close to the motorcycle and as low as possible to minimize the change in the motorcycle's center of gravity.
- Distribute weight evenly on both sides of the vehicle.
- Do not load bulky items too far behind the rider or add weight to the handlebars or front forks.
- Do not exceed maximum load capacity stated on the label for bags, luggage, and racks, if equipped. Combined load of luggage rack and Tour-Pak must not exceed load capacity on the label within the Tour-Pak.
- Do not exceed the maximum load capacity stated within the media compartment, when indicated and if equipped.
- Check that cargo is secure. The cargo cannot shift while riding. Periodically recheck load.
- Close and lock luggage before riding or leaving the vehicle unattended.
- Accessories that change the operator's riding position may increase reaction time and affect handling of the motorcycle.
- Items with large surface areas, such as fairings, windshields, backrests and luggage racks (if equipped) can adversely affect stability and handling.
Fork Mounted Fairing
See Figure 1. The media compartment is an enclosure in the dash which may be used to connect a media device or store small items. Media players and USB storage devices with media files can be connected to the Universal Serial Bus Type-C (USB-C) port. IFCU system updates are also performed through a USB-C storage device.
The USB-C port charges the connected device while the motorcycle is turned on or while in accessory mode.
Open:See Figure 1. Push release button (2) to open media tray (1).
Close: Firmly push the door shut until latch engages
Install USB or media device:See Figure 2. Connect device to the USB-C port (1). Rest device on the padded mat (2). Close the compartment door.
The mat can be removed to clean within the media compartment. Install the mat before riding to prevent media devices from moving in the compartment and to minimize vibration.
| 1 | Media tray |
| 2 | Release button |
Figure 1. Media Compartment: Fork Mounted Fairing
| 1 | USB-C port |
| 2 | Mat |
Figure 2. Media Compartment (Open): Fork Mounted Fairing
Frame Mounted Fairing
See Figure 3. The media compartment on the right side of the fairing has a Universal Serial Bus Type-C (USB-C) port to connect with a phone, media device or USB-C drive. The USB-C port is powered and operational when the motorcycle is turned on or in accessory mode. An interface cable may be needed to connect with certain devices.
Open: Push down to release latch, Door is spring loaded to open. Pull up on the front of the compartment door.
Close: Push the door shut until latch is engaged.
Install USB or media device:See Figure 3.. Connect device to the USB-C port. Rest device in compartment. Close the compartment door.
Keep door closed while riding to prevent items from falling out. Remove valuable items from the media compartment before leaving the vehicle unattended.
Figure 3. Media Compartment: Frame Mounted Fairing
Devices
NOTE
Do not use media players with hard drives. Vibration may cause damage to device.
Not all media devices or media file types are compatible with the IFCU.
Connected devices may be used for the following purposes.
Phone: Charges the phone and plays media files from the phone. However, phone calling and text messaging features are achieved only through Bluetooth connection.
Media device: Charges the device and plays media files.
USB drive: Plays media files, imports/exports navigation files and loads software updates.
Memory card: Some types of memory cards can be connected to play media files. Connection requires an adapter or reader.
The radio continues to play while devices are added or removed. However, when importing/exporting files or installing updates to the radio, do not disconnect the USB device until the task has completed.