Remove Seat
1. Open a saddlebag lid. Refer to Operation → SADDLEBAGS.
2. See Figure 1. Remove a seat strap screw (4).
3. Pull seat strap (2) through slot in seat strap bracket (3).
4. Remove seat screw (1).
5. Lift rear of seat and pull rearward to remove.
Install Seat
1. See Figure 2. Align slot in seat with seat tongue. Push seat forward while lowering to engage seat.
2. See Figure 1. Install seat screw (1). Tighten.
Torque: 5.4–8.1 N·m (47.8–71.7 in-lbs) Seat screw
3. Pull up on seat to check that it is properly secured.
4. Insert seat strap (2) through slot in seat strap bracket (3).
5. Install seat strap screw (4). Tighten.
Torque: 5.4–8.1 N·m (47.8–71.7 in-lbs) Seat strap screw
6. Close saddlebag lid. Refer to Operation → SADDLEBAGS.
1Seat screw
2Seat strap
3Seat strap bracket (2)
4Seat strap screw (2)
Figure 1. Seat Screws
Figure 2. Seat Tongue