NOTE
Check transmission fluid with the motorcycle at ambient temperature. Inspect transmission dipstick O-ring. Replace if necessary.
| 1. | Park motorcycle on a level surface on jiffy stand. | |
| 2. | See Figure 1. Remove transmission filler plug/dipstick. Wipe dipstick clean. | |
| 3. | Install filler plug/dipstick until O-ring contacts the case. Do not tighten. | |
| 4. | See Figure 2. Remove filler plug/dipstick. Check lubricant level on dipstick. Proper oil level is between the Add (A) (1) and Full (F) (2) marks. | |
| 5. | If lubricant level is low, add recommended Harley-Davidson lubricant to bring level to between the A mark and the F marks. Refer to Table 1. | |
| 6. | Install filler plug/dipstick. Tighten to specification. Torque: 2.8–8.5 N·m (25–75 in-lbs) Transmission filler plug/dipstick |
Figure 1. Transmission Filler Plug/Dipstick Location
| 1 | Add (A) |
| 2 | Full (F) |
Figure 2. Transmission Lubricant Level
Table 1. Recommended Transmission Lubricants
LUBRICANT | QUANTITY * | |
|---|---|---|
fl oz | L | |
FORMULA+ TRANSMISSION AND PRIMARY CHAINCASE LUBRICANT | 28 | 0.83 |
SCREAMIN' EAGLE SYN3 FULL SYNTHETIC MOTORCYCLE LUBRICANT 20W50 | 28 | 0.83 |
* Fill quantity for a transmission lubricant change. | ||