See Figure 1. A rider headset connector is located on the left side of the inner fairing. The headset is used to operate the CB, intercom, voice recognition and other features on equipped models.

Use the Harley-Davidson 7-pin DIN headset that is supplied with equipped models or purchased from a Harley-Davidson dealer. Other headset microphones will not work. See the instructions that are included with the headset to install in a helmet.

Connect the headset by aligning the ridge on the headset cord with the slot on the connector.

Audio routing for the headset is controlled through the radio. Volume and push-to-talk functions are done using the rider hand controls. See the BOOM! BOX OWNER'S MANUAL.

The socket cap remains shut when not in use to prevent dirt and water from entering the socket. Close the socket cap before washing the motorcycle.