| 1. | See Maintenance and Lubrication → Transmission Lubricant → Transmission Filler Plug. Remove transmission filler plug/dipstick. | |
NOTICE When draining or adding lubricant, do not allow dirt, debris or other contaminants to enter the engine. (00198a)  WARNINGBe sure that no lubricants or fluids get on tires, wheels or brakes when changing fluid. Traction can be adversely affected, which could result in loss of control of the motorcycle and death or serious injury. (00047d) | ||
| 2. | See Figure 1. Remove transmission drain plug and drain lubricant into a suitable container. NOTE Dispose of transmission lubricant in accordance with local regulations. | |
| 3. | Inspect O-ring on drain plug for tears or damage. Replace as required. Wipe any foreign material from plug. | |
NOTICE Do not over-tighten filler or drain plug. Doing so could result in a lubricant leak. (00200b) | ||
| 4. | Install drain plug with O-ring. Tighten to 19–28.5 N·m (14–21 ft-lbs). Do not over-tighten. | |
| 5. | Fill the transmission with 0.83 L (28 fl oz) of recommended Harley-Davidson lubricant. Refer to Maintenance and Lubrication → Transmission Lubricant → Recommended Lubricant. | |
| 6. | See Maintenance and Lubrication → Transmission Lubricant. Check lubricant level and add lubricant to bring the level between the ADD and FULL marks. | |
| 7. | Install filler plug/dipstick and tighten to 2.8–8.5 N·m (25–75 in-lbs). |
| 1 | Transmission drain plug (right side) |
| 2 | Engine oil drain plug and O-ring |
| 3 | Hex plug (do not remove) |
Figure 1. Oil Pan