1. | Fill fuel tank and add a gasoline stabilizer. Use one of the commercially available gasoline stabilizers and follow the manufacturer's instructions. | |
2. | Warm motorcycle to operating temperature. Change oil and turn engine over to circulate the new oil. | |
3. | Adjust the belt. | |
4. | Check tire inflation. Adjust to proper inflation pressure. | |
5. | Prepare battery for winter storage. See Maintenance and Lubrication → Battery: General. | |
WARNING Explosive hydrogen gas, which escapes during charging, could cause death or serious injury. Charge battery in a well-ventilated area. Keep open flames, electrical sparks and smoking materials away from battery at all times. KEEP BATTERIES AWAY FROM CHILDREN. (00065a) | ||
6. | If the motorcycle is to be stored with security system armed, it will be necessary to connect a Battery Tender to maintain battery charge. If security system will not be armed and a Battery Tender is not available, remove the Maxi-fuse. | |
NOTICE Use only Genuine Harley-Davidson Extended Life Antifreeze and Coolant. Use of other coolants/mixtures may lead to motorcycle damage. (00179c) | ||
7. | Check and fill the cooling system. | |
8. | To protect the vehicle's body panels, engine, chassis and wheels from corrosion, follow the cosmetic care procedures described in the Accessory Maintenance section of this owner's manual prior to storage. | |
9. | If motorcycle is to be covered, use a material such as light canvas that will breathe. Plastic materials that do not breathe promote the formation of condensation. |
1. | See Maintenance and Lubrication → Battery: General for proper battery care. Charge and install the battery. | |
2. | Remove and inspect the spark plugs. Replace if necessary. | |
3. | Clean the air cleaner element. | |
4. | Start the engine and run until it reaches normal operating temperature. Turn off engine. | |
5. | Check the oil. | |
6. | Check the clutch fluid level. | |
7. | Check controls to be sure they are operating properly. Operate the front and rear brakes, throttle, clutch and shifter. | |
8. | Check steering for smoothness by turning the handlebars through the full operating range. | |
WARNING Coolant mixture contains toxic chemicals, which may be fatal if swallowed. If swallowed, do not induce vomiting; call a physician immediately. Use in a well ventilated area. Irritation to skin or eyes can occur from vapors or direct contact. In case of skin or eye contact, flush thoroughly with water and go to hospital, if necessary. Dispose of used coolant according to federal, state and local regulations. (00092a) | ||
9. | Check the radiator connections and coolant level. | |
WARNING Be sure tires are properly inflated, balanced, undamaged, and have adequate tread. Inspect your tires regularly and see a Harley-Davidson dealer for replacements. Riding with excessively worn, unbalanced, improperly inflated, overloaded or damaged tires can lead to tire failure and adversely affect stability and handling, which could result in death or serious injury. (00014b) | ||
10. | Check tire pressure. Incorrect pressure will result in poor riding characteristics and can affect handling and stability. | |
11. | Check all electrical equipment and switches including the stop lamp, turn signals and horn for proper operation. | |
12. | Check for any fuel, oil, coolant or brake fluid leaks. |