ABS Lamp
See
Figure 1. The amber ABS lamp (4) begins to flash at key ON to indicate that the system is operational. It continues to flash until motorcycle speed exceeds 5 km/h (3 mph). Continuous illumination of the lamp will only occur when ABS detects that the system is malfunctioning. See a Harley-Davidson dealer for service.

WARNING
If ABS lamp continues flashing at speeds greater than 5 km/h (3 mph) or remains on continuously, the ABS is not operating. The standard brake system is operational, but wheel lock up can occur. Contact a Harley-Davidson Dealer to have ABS repaired. A locked wheel will skid and can cause loss of vehicle control, which could result in death or serious injury. (00361b)
Check Engine Lamp
See
Figure 1. The check engine lamp (6) indicates whether the engine/engine management system is operating normally. The lamp color is amber.
The check engine lamp normally illuminates when the ignition is first turned on and remains on for approximately 4 seconds. During this time the engine management system runs a series of self-diagnostics.
If the engine lamp illuminates at any other time, see a Harley-Davidson dealer.