| 1. | See Maintenance and Lubrication → Check Transmission Lubricant → Transmission Filler Plug. Remove transmission filler plug/dipstick. | |
 WARNINGBe sure that no lubricants or fluids get on tires, wheels or brakes when changing fluid. Traction can be adversely affected, which could result in loss of control of the motorcycle and death or serious injury. (00047d) | ||
| 2. | See Figure 1. Remove transmission drain plug. Drain transmission. | |
| 3. | Clean and inspect drain plug and O-ring. | |
NOTICE Do not over-tighten filler or drain plug. Doing so could result in a lubricant leak. (00200b) | ||
| 4. | Install drain plug with new O-ring. Tighten. Do not over-tighten. Torque: 19–28.5 N·m (14–21 ft-lbs) Transmission drain plug | |
| 5. | Fill the transmission with recommended Harley-Davidson lubricant. Refer to Maintenance and Lubrication → Check Transmission Lubricant → Transmission Lubricant. Volume: 0.83 L (28 fl oz) | |
| 6. | Check lubricant level. Add enough lubricant to bring the level between the add (A) and full (F) marks. See Maintenance and Lubrication → Check Transmission Lubricant → Transmission Lubricant Level. | |
| 7. | Install filler plug/dipstick. Tighten. Torque: 2.8–8.5 N·m (25–75 in-lbs) Transmission filler plug/dipstick |
| 1 | Transmission drain plug and O-ring (left side) |
| 2 | Engine oil drain plug |
| 3 | Hex plug (do not remove) |
Figure 1. Transmission Drain