When transporting the motorcycle, place the system in the transport mode. Otherwise, the alarm activated by motion detection can discharge the battery.
In the transport mode, the security system is armed without enabling the motion detector for one ignition cycle. This allows the vehicle to be picked up and moved in an armed state. However, any attempt to start the engine when the fob is not within range will trigger the alarm.
To Enter Transport Mode
  1. With an assigned fob within range, turn the ignition switch to IGNITION.
  2. Before the security lamp goes out, turn the ignition switch to OFF.
  3. Within three seconds, simultaneously press both the left and the right turn signal switches.
  4. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm.
NOTE
Models with fairing: When transport mode is enabled the odometer window will display TSPORT MODE ACTIVE message.
To Exit Transport Mode
With the fob present, turn the ignition switch to IGNITION to disarm the system.