| 1. | See Figure 1. Remove two screws (1) to release lens (2) from lamp housing (4). | |
| 2. | While pushing bulb (3) in, rotate counterclockwise to remove. | |
| 3. | Inspect condition of electrical contacts in socket. If necessary, clean with a small wire brush and electrical contact cleaner. | |
| 4. | Apply ELECTRICAL CONTACT LUBRICANT to contacts in socket and at bottom of new bulb. | |
| 5. | Align pins on new bulb with guides in bulb socket. Push and rotate new bulb clockwise into socket. | |
| 6. | Secure lens (2) to lamp housing (4) with two screws (1). | |
 WARNINGBe sure that all lights and switches operate properly before operating motorcycle. Low visibility of rider can result in death or serious injury. (00316a) | ||
| 7. | Check operation of all lamps. |
| 1 | Screws (2) |
| 2 | Lens |
| 3 | Bulb |
| 4 | Lamp housing |
Figure 1. Turn Signal Lamp Assembly: Flat Lens Style