FLHP models have a removable windshield.
NOTE
Windshields require special care. Do not use ammonia-based or gas station window cleaners. These cleaners can damage the windshield. For proper windshield maintenance, see Care and Cleaning → Windshield Care.
Removal
  1. See Figure 1. Lift the wire form latch springs on both sides of the windshield bracket.
  2. Push the top of the windshield forward to disengage from the top grommets.
  3. Lift the windshield up to disengage from the bottom grommets.
Installation
  1. See Figure 1. Firmly seat the bottom of the windshield bracket to engage the lower grommets.
  2. Lift the wire form latch springs on both sides of the windshield bracket.
  3. Push the top of the windshield rearward to engage the top grommets.
  4. Release the wire form latch springs. Check that all four bracket notches are seated in the grommets and the windshield is secure on the motorcycle.
1Wire form latch
2Upper bracket notch
3Lower bracket notch
Figure 1. Windshield: FLHP